Pneumatic Single-Operator Bagging Scale

Pneumatic Single-Operator Bagging Scale

Air-driven bagging scale for grain, seed and granular material, operated by one person with automatic weight cut-off and a bag clamp that holds the bag during filling.

Запросить цену

Overview

A pneumatic bagging scale uses compressed air to open and close the filling gate. There is no motor in the filling path, which keeps the machine simple and makes it a practical choice where maintenance access or electrical safety is a concern.

The operator clamps the bag, filling starts, the scale cuts off at the set weight, and the operator releases the bag. Bag count and accumulated weight are displayed on the controller.

Choosing between pneumatic and electric

Pneumatic machines are simple and robust and are usually preferred where the plant already has compressed air. Electric (motorised) machines are preferred where air is not available or where very high cycle rates are needed. Both are available; tell us which fits your plant.

Основные особенности

  • Air-driven filling gate — few wearing electrical parts
  • Automatic cut-off at the set bag weight
  • Bag clamp holds the bag while filling
  • Bag counter and total weight
  • Adjustable for different bag weights
  • Simple to service in remote plants

Преимущества

  • Fewer electrical wear parts
  • Easy service
  • Consistent cut-off
  • Adapts to several bag sizes

Принцип работы

Compressed air opens the filling gate; the weighing controller closes it at the target weight; the operator clamps and releases the bag.

Область применения

  • Grain bagging
  • Seed bagging
  • Granular fertiliser
  • Depot and cooperative packing
  • Plants with compressed air
  • Single-operator positions
  • Low-maintenance sites

Технические характеристики

FeedingPneumatic gate
Weighing rangeSet to your bag weight — confirmed in the technical agreement
Air supplyCompressed air required — pressure and consumption stated in the offer
OperationOne operator
Bag typesWoven, paper or PE bags
Body / contact materialCarbon steel (standard); stainless steel or food-grade lining available on request
Surface finishPrimed and top-coated; contact surfaces deburred and smooth
Electrical supplyConfigured for the destination country (single or three phase) — stated on the quotation
ControlLocal control panel; PLC and weighing controller brand confirmed in the offer
Характеристики рассчитываются под материал и условия площадки и фиксируются в техническом соглашении.

Похожие машины

Сообщите материал и производительность

Укажите материал, производительность в час, требуемую чистоту и условия площадки. Ответим, чего не хватает для реальной цены.

Запросить цену