Bucket Elevator for Grain (TD Series, Belt or Chain)

Bucket Elevator for Grain (TD Series, Belt or Chain)

Vertical conveying of grain and granular material with belt or chain traction, sealed casing and dust-tight joints — sized to your lift height and throughput.

Solicitar orçamento

Overview

Bucket elevators move material vertically between floors or into silos without taking up floor space. Material is scooped at the bottom inlet and discharged at the top, either by gravity or centrifugal throw depending on head speed.

We supply belt type and chain type elevators. Belt type suits grain and seed where breakage and noise matter; chain type suits heavier or hotter material and longer service intervals. Casing is sealed with inspection doors, so dust stays inside the machine.

Where it fits in the line

After the receiving pit and before cleaning, or between cleaning stages and the packing or storage bin. In a typical grain cleaning line the elevator is the link between horizontal conveyors and the gravity separator or destoner.

What we need to size it

Lift height centre to centre, throughput required, material and bulk density, discharge height above the receiving bin, and whether the site needs a self-supporting tower or a leg bolted to existing steel. Buckets, belt width and drive are then selected for your duty.

Características principais

  • Belt or chain traction, selected per material
  • Sealed casing with inspection doors
  • Gravity or centrifugal discharge
  • Anti-blocking boot with clean-out door
  • Backstop to prevent reverse run on stop
  • Buckets in carbon steel, stainless or engineering plastic

Vantagens

  • Small footprint for vertical transfer
  • Sealed against dust
  • Belt or chain to match the material
  • Wear parts accessible without dismantling

Como funciona

Buckets scoop material at the boot and are carried up by belt or chain, then discharged at the head by gravity or centrifugal throw.

Aplicações típicas

  • Grain cleaning lines
  • Rice and flour mills
  • Seed plants
  • Feed mills
  • Silo and warehouse intake
  • Multi-floor plants
  • Silo intake
  • Long-run conveying between cleaning stages

Especificações

TypeTD series, belt type or chain type
ThroughputSelected per material and bucket width — confirmed in the offer
Lift heightBuilt to your layout (centre-to-centre height required on the drawing)
Bucket materialCarbon steel / stainless steel / PP
CasingBolted sections, sealed, with inspection doors
DriveGeared motor with backstop; chain or belt transmission as required
Body / contact materialCarbon steel (standard); stainless steel or food-grade lining available on request
Surface finishPrimed and top-coated; contact surfaces deburred and smooth
Electrical supplyConfigured for the destination country (single or three phase) — stated on the quotation
As especificações são calculadas conforme o material e as condições da planta e confirmadas no acordo técnico.

Informe o material e a capacidade

Envie o material, a capacidade por hora, a limpeza desejada e as condições da planta. Respondemos o que falta para um preço real.

Solicitar orçamento